NMGLUGERS (in particular, Ted and Akkana} OMG, you guys are so thorough. I'm impressed and have always loaded my laptops with dual-booting (LINUX / WIN) which I understand as to be cheating somewhat. But, if I don't do it that way, my wife has, consistently, chortled about how "I'm not having that problem on my laptop". It does start to depress your forward thinking after a while. Best, Satsangat (dual-booter by necessity) On Sat, Jul 4, 2020 at 9:42 AM Akkana Peck <akkana@shallowsky.com> wrote:
Ted Pomeroy writes:
NMGLugers, I had trouble with my mic in Xubuntu 20.04 during our July 2nd meeting. I have resolved this today, but the route was convoluted so I cannot be sure which step was the most likely single solution. My first
Audio has gotten insanely complicated lately -- I feel your pain and I'm glad you got it working.
choice for the solution is the Pulseaudio mixer where I found the "Input Devices" tab and un-checked the "Set as fallback" choice. As this was the
I found the "Set as fallback" buttons unhelpful in pavucontrol (probably the same app you're using as Pulseaudio mixer) because it doesn't give you any way of finding out what the current fallback is. Did I press the button, or not? Which one did I make the fallback? Did it remember it from last time? (Sometimes it does, other times not.)
I got so frustrated that I ended up writing a web page where I collected what I'd learned about pulseaudio, pacmd and pactl: https://shallowsky.com/linux/pulseaudio-command-line.html and I wrote a script called pulsehelper to list audio source/sink status and set fallbacks: https://github.com/akkana/scripts/blob/master/pulsehelper.py
Setting the fallbacks right doesn't always help with Zoom or Jitsi, though, because pulse also keeps a memory of which app uses which device, so even if I set the default mic to be the GoPro, pulse may decide that chromium should be using the built-in mic even though it's muted. So I always have to check the audio prefs immediately after starting zoom, jitsi or discord to make sure it's using "System default" instead of some specific device.
install the gui for the Alsamixer and to adjust the "Capture" level. It took a few tries in the Alsamixergui to get the Alsamixer to respond, but this is simpler than manually adjusting the /usr/share/alsa/alsa.conf.d
Adding to the complication, it varies with every release. Under Ubuntu 19.10, I couldn't adjust volume in pavucontrol at all. I used use pavucontrol to set which speakers (sinks) and which microphone (source) was active, but the volume sliders did nothing, and I had to run alsamixer (or amixer from the commandline) to adjust volume. I bound my laptop's Vol+ key to "amixer sset PCM 4%+ unmute" and similarly for Vol- and mute. Now, in 20.04, alsamixer/amixer don't change the volume at all; I still need to find pulse commands that I can bind to my laptop's volume buttons.
...Akkana _______________________________________________ nmglug mailing list nmglug@lists.nmglug.org http://lists.nmglug.org/listinfo.cgi/nmglug-nmglug.org